Home
Back
Hydraulic Horsepower Formula:
| From: | To: |
Hydraulic Horsepower (HHP) is a measure of the power required to drive a hydraulic pump. It represents the actual power needed to move fluid at a specified flow rate against a given pressure.
The calculator uses the hydraulic horsepower formula:
Where:
Explanation: The formula calculates the power required to move hydraulic fluid by multiplying flow rate and pressure, then dividing by the conversion factor 1714.
Details: Accurate HHP calculation is crucial for proper pump selection, system design, and ensuring efficient operation of hydraulic systems. It helps determine the appropriate motor size and prevents system overload.
Tips: Enter flow rate in gallons per minute and pressure in pounds per square inch. Both values must be positive numbers greater than zero for accurate calculation.
Q1: Why is the constant 1714 used in the formula?
A: The constant 1714 converts the product of flow (GPM) and pressure (PSI) into horsepower units, based on the standard conversion factors.
Q2: What are typical HHP values for industrial pumps?
A: HHP values vary widely depending on application, ranging from fractional horsepower for small systems to hundreds of horsepower for large industrial applications.
Q3: How does HHP relate to motor horsepower?
A: Motor horsepower should be slightly higher than calculated HHP to account for efficiency losses and provide a safety margin for the system.
Q4: Can this formula be used for all types of fluids?
A: The formula is primarily designed for water-like fluids. For fluids with significantly different viscosities, additional factors may need to be considered.
Q5: What's the difference between HHP and brake horsepower?
A: HHP represents the hydraulic power output, while brake horsepower represents the mechanical power input required at the pump shaft, accounting for pump efficiency.